Causes of uneven warp and uneven threading of circular looms

The causes of uneven warp yarns and uneven threading of circular looms are a headache for mechanical users, so today we will analyze and share the causes of uneven warp yarns and uneven threading of circular looms. We will introduce the corresponding solutions, so let's take a closer look at it.

1. The position where the warp thread passes is unevenly distributed on the circumference. Solution: re-thread the thread

2. The jump rod warp wires are unevenly distributed, the jump rod is bent, and the tension spring is loose. Solution: repair and replace, re-thread

3, the uneven density of the brown frame passing through

4. The gate threading is dense and sparse. Solution: change threading

5. In the process from the warp frame to the ring gauge, the warp yarns cross and wind. Solution: Check each warp in the following parts and change the cross winding

6. ​​The warp yarn is wound with spools, and the quality is poor. Solution: Replace the axis

7. There are tension, slipping, inconsistent elasticity and different warp widths. The solution: to improve the quality of the wire, the wide wire and the narrow wire are interlaced.

I believe everyone should be clear about this. Regarding the causes and solutions of the uneven warp and uneven threading of the circular loom, we can consult us at any time if we don’t know anything about it.